10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

1、 Polypropylene (PP)

抗沖擊能力差（在高載重條件下容易斷裂），強度好，耐侯（抗老化，抗紫外線等）時間短，耐高溫，收縮率小，托盤行業很少使用。

Low impact resistance (easy to fracture under high load conditions), high strength, resistance to aging (anti aging, UV resistance, etc.), short time, high temperature resistance, low shrinkage, and pallet industry is seldom used.

二、拉絲薄膜料

2、 Drawing film material

拉絲薄膜料托盤的機械強度約為共聚聚丙烯料托盤的百分之七十左右，雖然韌性好，但是在使用過程中容易發生彎曲，透光和抗表面老化性能不及共聚聚丙烯料托盤，如果在制造薄膜料托盤時沒有添加足夠的抗老化材料，時間稍長就容易在強烈的陽光下過早地發生表面龜裂、脆化等現象。薄膜料制造出的托盤透氣性及傳導熱量的速度都比共聚聚丙烯大，也就是說再冬天容易變脆，從而在使用過程中容易發生斷裂等現象，在無形中也就增加了使用成本。

The mechanical strength of the wire drawing material pallet is about seventy percent of that of the polypropylene polypropylene pallet. Although the toughness is good, it is prone to bend in the course of use, and its transmittance and surface aging resistance are not as good as that of the polypropylene polypropylene pallet. If there is not enough anti aging material when making the film tray, it will happen easily in a strong sunlight for a longer time. Surface cracking, embrittlement and other phenomena. The air permeability and heat conduction speed of the tray made of film material are higher than that of copolypropylene, that is to say, it is easy to become brittle in winter, so it is easy to fracture and other phenomena in the use process, which will increase the use cost virtually.

三、聚乙烯（HDPE）

3、 Polyethylene (HDPE)

即：高密度低壓聚乙烯（HDPE）其特點是：耐候（即：抗老化，抗紫外線等）時間長；強度較好，抗沖擊能力適中；但耐低溫性能差，低溫或超負荷使用及撞擊的情況下易發生斷裂；收縮率較大，溫差過大或周轉頻繁易老化過快。

That is: high density low pressure polyethylene (HDPE) is characterized by weathering (i.e., anti-aging, UV resistance, etc.) for a long time. The strength is good and the impact resistance is moderate. However, it has poor resistance to low temperature, prone to fracture under the condition of low temperature or overload and impact. The shrinkage rate is large, the temperature difference is too large or the turnover is frequent and the aging is too fast.

四、共聚聚丙烯（EPS30R）

4、 Polypropylene copolymer (EPS30R)

為了更好的滿足客戶的需求，威海都程塑料有限公司于2005年初研制成功以共聚聚丙烯為原材料的托盤。此材料又稱改性聚丙烯（EPS30R），是在聚丙烯分子中添加聚乙烯的分子單體，使其性能兼具了以上兩種原材料的優點，達到做載重塑料托盤的標準；并使使用壽命延長8-15年。共聚聚丙烯特點是：抗沖擊性能強，強度較好，也就是說由此材料制造出的托盤韌性強，同時又不容易發生彎曲；耐低溫，耐候（抗老化，抗紫外線等）時間長，收縮率小。在北方地區，冬季氣溫低，且冬夏溫差大，容易使塑料托盤變脆發生斷裂，加快老化速度；而共聚聚丙烯托盤正是彌補這一不足，從而達到更好的使用效果，也就從根本上降低了使用成本，是托盤行業更新?lián)Q代的材料。

In order to better meet the needs of customers, Weihai Ducheng Plastics Co., Ltd. successfully developed a pallet with copolypropylene as raw material in early 2005. This material, also known as modified polypropylene (EPS30R), is a kind of molecular monomer added with polyethylene in polypropylene molecules, which makes its performance have the advantages of the above two raw materials, reaching the best standard for making load-bearing plastic pallet, and prolonging the service life to 8-15 years. The characteristics of copolymerized polypropylene are: strong impact resistance and good strength. That is to say, the tray made of this material is strong in toughness, and it is not easy to bend at the same time. It has low temperature resistance, weathering resistance (anti aging, UV resistance, etc.) and has a low shrinkage rate. In northern China, the low temperature in winter and the large temperature difference between winter and summer can easily make the plastic tray brittle and fracture, and accelerate the aging speed; and the copolypropylene tray is to make up for this deficiency, so as to achieve the best use effect, and fundamentally reduce the use cost, which is the preferred material for pallet industry upgrading.

五、回收塑料

5、 Recycled plastics

回收塑料制作的托盤，顏色較暗，低廉，但其耐候（抗老化，抗紫外線等）時間短，強度較弱，抗沖擊能力差，耐低溫性能差（受力容易斷裂，使用周期短），使用成本遠高于前三種材料。

The tray made of recycled plastic is dark in color and low in price, but its weatherability (anti-aging, UV resistance, etc.) is short, its strength is weak, its impact resistance is poor, its low temperature resistance is poor (stress is easy to fracture, and its use cycle is short), and its use cost is much higher than that of the first three materials.