10年專注重型紙箱定制生產廠家

精密儀器,電子電器,瓦楞紙箱等包裝解決方案提供商

1. Plastic pallets should be placed with care to avoid uneven stress and damage when landing.

2、在放置貨品時，應均勻放置，以免在起吊和搬運進程中發生側傾。

2. When placing the goods, they should be evenly placed to avoid tilting during lifting and handling.

3、在使用搬運設備時，要考慮貨品的尺寸差異是否適合使用塑料托盤，避免塑料托盤尺寸和支撐不當。

3. When using the handling equipment, we should consider whether the size difference of goods is suitable for the use of plastic pallets to avoid improper size and support of plastic pallets.

4、堆放時，應考慮底盤的承載能力。

4. When stacking, the bearing capacity of chassis should be considered.

5、塑料托盤的精確使用，應通過包裝組合，堆放在塑料托盤上，并適當綁縛包裝，便于機器搬運和運輸使用，以滿足搬運、運輸和儲存的要求。為包管塑料托盤的持久平安然安使用，希望根據要求精確使用塑料托盤。

5. The accurate use of plastic pallets should be stacked on the plastic pallets through packaging combination, and properly bound and packaged to facilitate machine handling and transportation, so as to meet the requirements of handling, transportation and storage. In order to ensure the durable and safe use of plastic pallet, we hope to use plastic pallet accurately according to the requirements.

6、塑料托盤應防止日曬，以免老化，縮短使用壽命。

6. Plastic pallets should be protected from sunlight to avoid aging and shorten service life.

7、禁止從高處將貨品扔進塑料托盤。合理確定貨品在托盤中的堆放方式。貨品擺放要均勻，不集中，偏心堆放。載運重物的托盤應放在平地或物體外面。

7. It is forbidden to throw goods into the plastic tray from a height. Reasonably determine the stacking mode of goods in the pallet. The goods should be placed evenly, not concentrated and stacked eccentrically. Pallets carrying heavy objects should be placed on flat ground or outside objects.

8、嚴禁從高處拋擲塑料托盤，以免托盤因激烈撞擊而破碎破裂。

8. It is strictly forbidden to throw the plastic tray from high place, so as to avoid the breakage of the tray due to fierce impact.

9、叉車或手動液壓車作業時，叉刺應盡量靠在托盤叉孔外側，叉刺應全部伸入托盤，待托盤平穩上升后才能轉變角度。叉刺不該撞擊托盤側面，以防止托盤破碎斷裂。

9. When forklift or manual hydraulic truck is working, the forks should lean on the outside of the fork hole of the pallet as far as possible, and the forks should all extend into the pallet, and the angle can only be changed after the pallet rises steadily. The forks should not strike the side of the tray to prevent the tray from breaking.

10、托盤放在貨架上時，需要使用貨架式托盤，承載能力取決于貨架構造，嚴禁超載使用。

10. When the pallet is placed on the shelf, it needs to use shelf type pallet. The bearing capacity depends on the shelf structure, and overloading is strictly prohibited.

以上的精彩內容來自：托盤廠家詳細的內容請點擊進入我們的網站進行查詢對接：http://www.ywjbs.com

The above wonderful content comes from: pallet manufacturers. For details, please click to enter our website for query and docking http://www.ywjbs.com