重型紙箱的調配里包含著油墨之間的調和，以及油墨印刷適應性的調節。重型紙箱油墨印刷的適應性又包含著油墨的粘性、流動性和干燥性等。在選購水性油墨時應該著重①選擇口碑較好的供應商，確定水性油墨的質量以及性價比的高低與否。②水性油墨分為高、中、普通檔次。他們之間的區別就在于干燥速度、耐磨性、飽和度、防水性、光澤度、細度、粘度等。確定好要求再進行相應的選購。③與擁有技術的水性油墨企業合作，這樣一來水性油墨的質量和供貨問題都會相應穩定
The deployment of heavy-duty cartons contains the adjustment between the ink, as well as the adjustment of ink printing adaptability. The adaptability of heavy-duty carton ink printing includes the viscosity, fluidity and dryness of ink. In the purchase of water-based ink should focus on the selection of a good reputation of suppliers, to determine the quality of water-based ink and cost performance or not. ② Water based ink is divided into high, medium and ordinary grades. The difference between them lies in drying speed, wear resistance, saturation, waterproof, glossiness, fineness, viscosity, etc. Determine the requirements and then make the corresponding purchase. ③ With strong technology of water-based ink enterprises, so that the quality of water-based ink and supply problems will be correspondingly stable
我們?cè)賮?lái)看看關于重型紙箱水性油墨的管理?xiàng)l件：
Let's take a look at the management conditions of water-based ink for heavy-duty cartons
1、適當定時的做印刷滾筒清理，以免之前的油墨殘留使下一次的印刷出現重影模糊不清等狀況。
1. Proper timing to do printing drum cleaning, in order to avoid the previous ink residue to make the next printing appear blurred.
2、為避免粘性過低造成的顏色淺化，應將機器內的水排放干凈。
2. In order to avoid light color caused by low viscosity, the water in the machine should be drained.
3、油墨上機量應控制在5-10KG以內。
3. Ink on the machine should be controlled within 5-10kg.
4、添加新的油墨時應當再三核對清楚油墨的顏色是否一致。
4. When adding new ink, you should check again and again whether the color of the ink is consistent.
5、重型紙箱印刷機在使用一段時間后，應當做好保養，比如定時定量的進行補水穩定劑來穩定印刷效果。
5. Heavy carton printing machine in use for a period of time, should do a good job of maintenance, such as regular and quantitative water stabilizer to stabilize the printing effect.
6、水性油墨在使用后應當加上蓋子嚴密封好，避免油墨變干、變質的發生。
6. Water based ink should be sealed tightly with a cover after use to avoid ink drying and deterioration.
7、上下印刷機時盡量不讓水流入墨桶從而稀釋油墨，降低油墨的粘性。
7. Try not to let the water flow into the ink barrel when getting up and down the printing machine, so as to dilute the ink and reduce the viscosity of the ink.
8、為防止掉色在印刷完成后抹上一層防潮油，既可以防止印刷掉色掉粉，還有一些防水防潮的作用。
8. In order to prevent color fading, apply a layer of moisture-proof oil after printing, which can not only prevent the printing from fading and powdering, but also have some waterproof and moisture-proof functions.
歡迎進入山東國泰民灃包裝科技有限公司網站,專注紙托盤,瓦楞紙箱,蔬菜包裝,重型紙箱包裝制作廠家,實惠!
